Description
System includes: Device, lead wires, four self-adhesive reusable electrodes, 9V battery, hard plastic carrying case, power adaptor, and English instruction manual
- Channel: Dual, isolated between channels
- Pulse Amplitude: Adjustable, 0-110 mA peak into 500 ohm load each channel
- Wave Form: Asymmetrical Bi-Phasic Square Pulse
- Voltage: 0 to 55V (Load: 500 ohm)
- Power source: 9 Volt Battery, or 110v Power Adapter
- Size: 11.8cm(L) x 6 cm(W) x 3.1cm(H)
- Weight: 157 grams with battery
- Pulse Rate: Adjustable, from 2 to 150 Hz, 1 Hz/step
- Pulse Width: Adjustable, from 50 to 300 microseconds, 10 µs/step
- Ramp Time: Adjustable, 1~8 seconds, 1 Sec./ step, The “On”time will increase and decrease in the setting value
- Modes: Five TENS Modes: B(Burst), N(Normal), M(Modulation Rate & Width), S1(Modulation Width), S2 (Modulation Width);
- Three EMS Modes: C(Constant), S(Synchronous), A(Alternate)
- Timer: Adjustable from 5 to 60 minutes, and continue(C), 5 minutes each step.
- Patient Compliance Meter: This unit can store 60 sets of operation records. Total recorded time is 999 hours.
- Low Battery Indicator: A low battery indicator shows up when the battery is low.
- Operating Condition: Temperature:0°~40°C
- Relative Humidity: 30%~75%
- Atmosphere Pressure: 700Hpa~1060Hpa
- Remark: There may be up to a +/-10% tolerance of all parameters and +/-20% tolerance of output amplitude & voltage
- Warranty: One year
- Made in Taiwan
- Official Canadian Authorized Distributor
- Health Canada Licence Device
Reviews
There are no reviews yet.